We are a renowned manufacturer of a qualitative array of Grease Lubrication Turbo Pump for our highly esteemed clients. They find application in several industries for grease lubrication as per the requirements of our customers. Optimum quality raw material is used in fabricating it in order to ensure its high quality, easy installation, efficiency, durability, corrosion resistance, low maintenance, optimum performance and a long life. This is because we test Grease Lubrication Turbo Pump on various parameters prior to dispatch.
Model | CXF-40/ 25E |
Pumping Speed (l/s Air) | 25 |
Inlet Flange | DN40 (DN) |
Outlet Flange | KF 16 (DN) |
Compression Ratio | N2: 10³; H2: 6x10³ |
Ultimate Vacuum (Torr) | ≤ 7.5x10 (DN40 ISO-K) |
Ultimate Vacuum (Pa) | ≤ 1x10 (DN40 ISO-K) |
Rotation Speed (rpm) | 36000 |
Run- Up Time (min) | ≤90 |
Bearing Type | Ceramic |
VIB (µm) | ≤ 0.1 |
Backing Pump (l/s) | 0.5-1 |
Cooling method optional | Air |
Bake- out temperature (ºC) | ≤ 80 |
Ambient temperature (ºC) | 5-48 |
Lubrication | Grease |
Mounting or ientation | Any |
Weight (lb/kg) | 3 |
Operating position | In any orientation |
Permissible magnetic feld max. | <3 mT |
Operating ambient temperature (cooling method, optional) | Forced air: 5 -35ºC |
Water: 5-40ºC | |
Cooing water | Temperature 10-25ºC |
Pressure: 0.2Mpa | |
Minimum flow: >0.8 L/min | |
Weight | 2.6kg (ISO-K) |
3.5kg (CF) | |
Electronic control unit (optional) | TC 100, TCP100 |
Operating voltage | 24 (±5%) VDC, ≥100W |
Interfaces (Optional) | RS-232 (RS-485), Remote |
Model | FF-100/300E |
Pumping Rate (L/s) | 300 |
Compression Ratio | N2: ≥6x10 |
He : ≥5x10 | |
Ultimate Pressure | ≤ 6x10 (DN100 LF) |
≤ 6x10 (DN100 DF) | |
Air Outlet Flange | KF25 |
Air Inlet Flange | DN100 LF |
DN100 CF | |
Bearing | Grease lubricated Ceramic Bearing |
Rated Speed (rmp) | 60000 |
Starting Time (min) | ≤3.5 |
Vibration (µm) | ≤0.1 |
Noise (dB(A)) | ≤55 |
Suggested Backing Pump (L/s) | 2-5 |
Recommended run-up pressure | <500 |
Max. Continuos fore- vacuum pressure (N2) | <200 |
Installation Mode | Arbitrary angle |
Baking temperature (ºC) | ≤ 80 (LF) |
≤ 120 (CF) | |
Cooling Method | Air cooling (5-32 ºC) |
Water Cooling (5-40 ºC) | |
Cooling Water | Temperature: 10-25 ºC |
Pressure: 0.15 Mpa | |
Flow : >1L/min | |
Weight (kg CF/LF) | 8.5 (DN100 LF |
11.0 (DN100 CF) |
Model | FF-160/700E | FF-160/700FE |
Pumping Speed (l/s Air) | 700 | 700 |
Inlet Flange | DN160ISO-K, DN160CF | DN160ISO-K, DN160CF |
Outlet Flange | KF 40 (DN) | KF 40 (DN) |
Compression Ratio | N2: 10³; H2: 6x10³ | N2: 10³; H2: 6x10³ |
Ultimate Vacuum (Torr) | ≤ 4.5x10 (DN16 ISO-K) | ≤ 4.5x10 (DN16 ISO-K) |
≤ 4.5x10 (DN160 CF) | ≤ 4.5x10 (DN160 CF) | |
Ultimate Vacuum (Pa) | ≤ 6x10 (DN16 ISO-K) | ≤ 6x10 (DN160 CF) |
≤ 6x10 (DN160 CF) | ≤ 4.5x10 (DN160 CF) | |
Rotation Speed (rpm) | 36000 | 36000 |
Run- Up Time (min) | ≤4 | ≤4 |
Bearing Type | Ceramic | Ceramic |
VIB (µm) | ≤ 0.1 | ≤ 0.1 |
Backing Pump (l/s) | 4-8 | 4-8 |
Cooling method optional | Water | Water/ Air |
Cooling water temperature (ºC) | ≤25 | ≤25 |
Bake- out temperature (ºC) | ≤ 100 | ≤ 100 |
Ambient temperature (ºC) | 5-40 | 5-40 (water) 5-32 (air) |
Lubrication | Grease | Grease |
Mounting or ientation | Any | Any |
Weight (lb/kg) | 42/ 19 | 42/ 23 |
Model | FF-200/1300E | FF-200/1300FE |
Pumping Speed (l/s Air) | 1300 | 1300 |
Inlet Flange | DN200 ISO-K, DN200 CF | DN200 ISO-K, DN200 CF |
Outlet Flange | KF 40 (DN) | KF 40 (DN) |
Compression Ratio | N2: 10³; H2: 6x10³ | N2: 10³; H2: 6x10³ |
Ultimate Vacuum (Torr) | ≤ 4.5x10 (DN200 ISO-K) | ≤ 4.5x10 (DN200 ISO-K) |
≤ 4.5x10 (DN200 CF) | ≤ 4.5x10 (DN200 CF) | |
Ultimate Vacuum (Pa) | ≤ 6x10 (DN200 ISO-K) | ≤ 6x10 (DN200 CF) |
≤ 6x10 (DN200 CF) | ≤ 6x10 (DN200 CF) | |
Rotation Speed (rpm) | 24000 | 24000 |
Run- Up Time (min) | ≤6 | ≤6 |
Bearing Type | Ceramic | Ceramic |
VIB (µm) | ≤ 0.1 | ≤ 0.1 |
Backing Pump (l/s) | 15-18 | 15-18 |
Cooling method optional | Water | Water/ Air |
Cooling water temperature (ºC) | ≤25 | ≤25 |
Bake- out temperature (ºC) | ≤ 100 | ≤ 100 |
Ambient temperature (ºC) | 5-40 | 5-40 (water) 5-32 (air) |
Lubrication | Grease | Grease |
Mounting or ientation | Any | Any |
Weight (lb/kg) | 64/29 | 73/33 |
Model | FF-250/2000E |
Pumping Speed (l/s Air) | 2000 |
Inlet Flange | DN250 ISO-K |
Outlet Flange | KF 50 (DN50 KF) |
Compression Ratio | N2: 10³; H2: 6x10³ |
Ultimate Vacuum (Torr) | ≤ 4.5x10 (DN250 ISO-K) |
≤ 4.5x10 (DN250 CF) | |
Ultimate Vacuum (Pa) | ≤ 6x10 (DN250 ISO-K) |
≤ 6x10 (DN250 CF) | |
Rotation Speed (rpm) | 24000 |
Run- Up Time (min) | ≤6 |
Bearing Type | Ceramic |
VIB (µm) | ≤ 0.1 |
Backing Pump (l/s) | 15 |
Cooling method optional | Water |
Cooling water temperature (ºC) | ≤25 |
Bake- out temperature (ºC) | ≤ 100 |
Ambient temperature (ºC) | 5-40 |
Lubrication | Grease |
Mounting or ientation | Any |
Weight (lb/kg) | 32 |
![]() |
KYKY TECHNOLOGY CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |